Latest elastic rail clip Tenders | Government elastic rail clip Tenders

Central Government/Public Sector

CTN :44824054

11 May, 2026 NA

Multi City - Multi State

Tender For corrigendum : supply of 6400 mm curved switch with 60e1a1 thick web tongue rail and 60 kg. 60 e1 r260 grade stock rail for 1 in 8.5, bg 60 kg. turnout on psc sleeper to rdso drawing no. t-9775 alt. 2 or latest alt if any with elastic fasteners and spring operated setting device (rdso- t - 6216 with latest alteration), confirming to irs specification no. t - 10 - 2025, irs t- 12 - 2009 for flat bottom rails and irs t- 62 - 2025 for end forging of thick web asymmetrical rails, including nylon cord reinforced grsp with confirming to irs specification t- 55 - 2025 (rev. 1) or latest if any and supply of all components/fittings listed as per annexure-a and excluding elastic rail clips, insulating liner, plate screw & single coil spring washer etc. (the alt. in drawings & specification issued by rdso upto 10 days prior on tender opening date shall be applicable in this tender ) firm to note : nylon cord reinforced grsp should only be purchased from rdso-approved sources through process inspection. (i) note: - the responsibility to procure rails will solely lie with the manufacturer (bid including rail cost / per set) in termsof railway board letter no. 2022 / track-i(p)/fabricators dt. 24.01.2022 (ii) the unique code shall be provided by the firm by punching / embossing on each set of tws, so that it can be correlated with the type of set- i.e., the type of flexure and the specified limit of degree of flexure suitable for left-hand or right-hand application. (iii) firm to supply 10 % additional fittings with each set as per note-26 of rdso drg. t-9775 alt. 2 of list ' a '. [ warranty period: 30 months after the date of delivery ]

CTN :44992596

26 May, 2026 NA

Multi City - Multi State

Tender For fabrication and supply of 6400 mm overriding derailing switches (lh/rh) for 1 in 8.5, bg 60 kg rail for fan shaped layouts on psc sleepers to rdso drg. no. t-6068 alt. 5 and irs specifications t-10-2025, complete in all respect as per drawing including plate screws but excluding fish plates, fish plate bolts and nuts, elastic rail clips and insulating liners. this is to be read along with para 33.0 of the special conditions mentioned in the nit. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44996281

11 May, 2026 NA

Multi City - Multi State

Tender For supply of 6400 mm curved switch with 60e1a1 thick web tongue rail and 60 kg. 60e1r260 grade stock rail for 1 in 8.5, bg 60 kg. turnout on psc sleeper to rdso drawing no. t-9775 alt. 3 or latest alt if any with elastic fasteners and spring operated setting device (rdso-t-6216 with latest alteration), confirming to irs specification no. t-10-2025, irs t-12-2009 for flat bottom rails and irst- 62 - 2025 for end forging of thick web asymmetrical rails, including nylon cord reinforced grsp withconfirming to irs specification t-55-2025 (rev. 1) or latest if any and supply of all components/fittings listed as per part-a and excluding elastic rail clips, metal liner/insulating liner (hvn), check rails etc.(the alt. in drawings & specification issued by rdso upto 10 days prior on tender opening date shall be applicable in this tender ) firm to note : nylon cord reinforced grsp should only be purchased from rdso-approved sources through process inspection.(the inspection certificate should be attached) (i) note: - the responsibility to procure rails will solely lie with the manufacturer (bid including rail cost/per set) in terms of railway board letter no. 2022/track-i(p)/fabricators dt. 24.01.2022 (ii) the unique code shall be provided by the firm by punching/embossing on each set of tws, so that it can be correlated with the type of set-i.e., the type of flexure and the specified limit of degree of flexure suitable for left-hand or right-hand application. (iii) firm to supply 10 % additional fittings as mention in rdso drg. t-9775 alt. 3 of part 'c' [ warranty period: 30 months after the date of delivery ]

CTN :44980028

29 Apr, 2026 NA

Dimapur - Nagaland

Tender For supply of electronic toe load measuring device. : electronically operated measuring device adopted foruse in track for measuring and recording the load of elastic rail clips in service. the display unit shall be compact, rugged, shock, dust and waterproof, electrically shielded and capable of functioning reliably in the severe field conditions normally encountered in indian railway system including on electrified section. unit should contain compression type load cell for load measurement with all alphanumeric lcd type load display indicator with facility of low battery and over load indication, rechargeable ni-cd battery pack for its operation, sockets for connecting gap sensing device to activate peak hold facility and for operation with external power pack etc, integrated with suitable and reliable electronic circuitry. the unit shall also be provided with two sprit levels rigidly placed at the base plate. the load cell shall be compressive type of stainless steel conforming to relevant is specification for stainless steel for manufacture of load cell. the tong shall be suitably heat treated to withstand a repetitive load cycle of 1400 kg without any sign of deformation/breakage. the link hanger and rotation handle shall be heat treated. after heat treatment, the hardness shall be in the range of 210- 240 hb. machine should have guarantee for one year from any material manufacturing defects. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44791737

18 May, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For corrigendum : manufacturing & supply of 11200mm curved switch with 60e1a1 thick web tongue rails for 1 in 16 turnout b.g. (1673mm) for 60e1 rail with r260 grade on psc sleepers for 25t axle load to rdso drg. no. t-10071 alt. nil and confirming to specification irs t-10-2025 with all fittings as per rdso drawing no. t-10071 excluding elastic rail clips & insulating liners. (list of fittings as per annexure b). (the alteration in drawing and specification issued by rdso up to one month prior to tender opening date shall be applicable). note: i. one set of spares/fittings as per list mentioned in table part c of drg. no. t-10071 shall be supplied with each lot of 10 sets of thick web switch (annexure c). ii. contracts/supply orders will be issued for quantities in the multiple of 10 sets only. iii. r-260 grade rail shall be utilized for the item. [ warrantyperiod: 30 months after the date of delivery ]

CTN :44968599

16 Jun, 2026 NA

Kolkata - West Bengal

Tender For supply of elastic rail clip mk.iii with flat toe 60 kg uic/52 kg rail sections to drg. no. rdso t-3701with specification conforming to irs-t-31-2021 with latest amendment, if any, with alt no. 7 with latest alterations, if any, [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44965195

11 May, 2026 46.20 Lacs

Anuppur - Madhya Pradesh

Tender For track fitting renewal (tfr) work for the existing psc sleeper i.e. supply and fixing of groove rubber pad,metal linner and elastic rail clip under psc sleeper in mppgcl private railway line from xing no. 16 inside power house to sangma loading platef

CTN :44902497

25 Apr, 2026 68.50 Lacs

Silvassa - Gujarat

Tender For corrigendum : hospital and office furniture for primary health center at naroli in dadra and nagar haveli district. - supply and installing icu fully motarized bed, ms top, 5" twin wheel castors with central locking, full length polymer safety side railings with embedded control panels, polymer head and foot panels iv pole, telescopic, 2 hooks urine bag holder (single) four section mattress, 4" thick battery box with battery oxygen cylinder cage (epoxy coated) as per detailed specifications, supply and installing icu fowler bed, ms top, 5" castors with diagonal locking, manually adjustable backrest, kneerest, height, trendelenburg , reverse trendelenburg split type full length polymer moulded safety side railing (2 sets) polymer moulded head and foot panels (removable) four section mattress, 4" thick iv pole, telescopic, 2 hooks removable type chromium plated forged handle urine bag holder (single) as per detailed specifications, supply and installing modular crash cart top drawer (1 set) & middle single drawer(1 set) with poly-carbonate partition plates. note: poly-carbonate partition plates of 1 set includes (3 long plates + 3 short plates) as per detailed specifications, supply and installing motorised examination couch with adjustable height, foot switch control, adjustable backrest on gas spring, battery backup, drawer for storage ms adjustable bp apparatus tray as per detailed specifications, supply and installing foldable wheel chair, with detachable armrest, adjustable and detachable footrest with foldable footrest, 12" rear wheel, with safety belt as per detailed specifications, supply and installing bedside locker without lock as per detailed specifications, supply and installing cardiac table as per detailed specifications, supply and installing all steel stool fully ss as per detailed specifications, supply and installing single step stool as per detailed specifications, supply and installing fully ss two shelf instrument trolley medium size medium size with 125mm dia synthetic body castors two with brake and two castors without brake as per detailed specifications, supply and installing ss dressing trolley (with ssbowl and bucket ) 1010 mm l x 510 mm w x 920 mm h with 125mm dia synthetic body castors two with brake and two castors without brake as per detailed specifications, supply and installing ss mayos trolley with four nonrusting castors, 50mm dia as per detailed specifications, supply and installing soiled linen trolley (ss) 960 mm h x 510 mm, with 125mm dia synthetic body castors two with brake and two castors without brake as per detailed specifications, supply and installing drug trolley as per detailed specifications, supply and installing emergency stretcher, ss collapsible side railing safety belts rexine covered 50mm thick mattress with two sections mattress dimension: 1790mm l x 560 mm w as per detailed specifications, supply and installing stretcher with o2 support, removable aluminium top, safety belts, mattress, 50 mm thicknessas per detailed specifications, supply and installing birthing bed with polymer moulded rails, head and foot board with iv rod and mattress in two sections with battery backup accessory storage rack as per detailed specifications, slotted angle racksize: l 900 x d 450x h 18004 shelves including top & bottom having 2 stiffener in each side.angles : 40mm x 40mm x 2mm(thick). shelf : 1mm crca sheet, tablespecificationssize: 1500l x 600d x 750htable top: 25mm thick pre laminate particle board with 2mmpvc edge lipping on all exposed edgessupport:end legs: ms powder coated perform legsintermediate legs: ms podwer coated 60x40mm legs andsupporting ms cross beams (40x20mm)tical raceway with built in separator for power and data of size 250h x 70mm thick with provision to mountswicthes and sockets on laminate facia with vertical wire entry cover for wire uptake from floor to raceway with 65mmdia wire manager grommet.pedestal2 drawer + 1 fillingspecifications:size: 400 x 450 x

Central Government/Public Sector

CTN :44858944

15 May, 2026 NA

Multi City - Multi State

Tender For corrigendum : supply of thick web switch expansion joint (twsej) as per rdso drg.no:t-8822 alt.4 orlatest alt.,for lwr bg (1673 mm) for 60e1 rail (r260 grade) with elastic fasteners and, confirming to irs specification no.t-10-2025, irs t-12-2009 for flat bottom rails, and irs specification no.t - 62 -2025 for end forging of thick web asymmetrical rails, including nylon cord reinforced grsp with confirming to irs specification t-55-2025 (rev.1) or latest if any and supply of all components/fittings listed asper annexure-i excluding elastic rail clips, insulating liner, plate screw, sleeper etc. (the alt in drawings and specifications issued by rdso up 10 days prior to tender opening date shall be applicable in this tender) firm to note :(i) nylon cord reinforced grsp should only be purchased from rdso-approved sources through process inspection. (ii) the responsibility to procure rails will solely lie with the manufacturer (bid including rail cost/per set) in terms of railway board letter no. 2022/track-i(p)/fabricators dt. 24.01.2022. (iii) firm to supply additional 20% of the quantity of the attach listed items with each purchase order as per annexure-i of rdso drg. (t-8822 alt.4). [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44957966

29 Apr, 2026 NA

Hubli - Karnataka

Tender For supply of front carrier plate with stiffener plate for aar-h type cbc with bdg materials & specification as per rdso specification no. rdso/2011/cg-03 (rev-03) warranty up to 84 months from date of delivery [ warranty period: 84 months after the date of delivery ]

Elastic Rail Clip Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector